|Color Index||Pigment Yellow 3|
|Physical Form||Yellow Powder|
|Heat Resistance(º C)||180|
|Fastness Properties||Full Color||Tint Color|
|Full Color||Pig. Content: 6%|
|Tint Color||Pig. : white=1:20|
|Oil Absorption||DIN ISO 787/5|
|Heat Resistance||5Min 10 Min|
|Acid Alkali Resist||DIN EN 20105-A02|
|5 Grade gray scale|
|Light Fastness||DIN EN 105-B01|
|8 Grade Fromblue wool Color Chart|
|Weather Fastness||DIN EN 20105-A02|
|5 Grade gray scale|
|Solvent Resist||DIN EN 20105-A03|
|5 Grade gray color degree|
|Oil Resistance||GB 251-84|
|5 Grade gray color degree|
Material Safety Data Sheet
1. Substance/Preparation and Company
Company: Honor Chemicals China Co Ltd.
2. Composition / Information On Ingredients
Chemical Nature: Arylide Yellow
Chemical Formula: C16H12Cl2N4O4
C.I. NO.: 11710, Pigment Yellow 3
CAS No.: 6486-23-3
EU NO.: 229-355-1
3. Hazard Identification
Critical hazards to man and the environment: None
4. First-Aid Measures
General advice: Remove contaminated clothing.
If inhaled: Keep patient calm, remove to fresh air and treat symptomatically.
On skin contact: Wash with soap and water, if symptoms occur, consult physician.
On contact with eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
On ingestion: Rinse month and then drink plenty of water.
5. Fire-Fighting Measures
Suitable extinguishing media
Water spray, dry extinguishing media, foam.
Extinguishing media which must not be used for safety reasons
High volume water jet
Contaminated water and soil must be disposed of conform to local regulations. Sufficient
Special protective equipment for firefighters
Wear full and thick protective clothing. Wear self-contained breathing apparatus.
Hazardous decomposition products
Oxides of carbon, Toxic gases / vapours
6. Accidental Release Measures
Personal precautions: Do not breathe dust.
Environmental precautions: Do not let product enter drains. Avoid dust formation.
Method for cleaning up: Contain with dust binding material and dispose.
7. Handling and Storage
Handling: Breathing must be protected when large quantities are decanted without local exhaust ventilation.
Protection against fir and explosion: Take precautionary measures against static discharges.
Storage: Keep tightly closed in a dry, cool and well ventilated place. direct sources of heat must be avoided and open containers must be allowed to stand over extend periods of time. Position containers so that any labeling information on the container is visible.
Caution: Keep this product well sealed. Keep in cool, dry place. Close containers immediately after use.
8. Exposure Controls and Personal Protection
Additional information on the lay-out of technical plant (See 7).
Personal protective equipment
Technical measures / Precautions
No special precautions required.
Respiratory protection: Do not breathe dust
Eye protection: Goggles
General safety and hygiene measures: The usual precautions for the handling of chemicals must be observed
9. Physical and Chemical Properties
Form: Dry powder
Change in physical state
Melting point/melting rang: 250ºC
Flash point: N/A, High Melting Material
Explosion hazard: Any organic compound, dust explosion hazard
Vapour pressure: N/ A
Density, 20ºC :
Specific Surface(m²/g): 12
Average Particle size(um): 0.48-0.57
Solubility in water: Insoluble
Solubility in other solvent: Insoluble
PH value: 6.0-7.0
10. Stability and Reaction
Conditions to avoid: Against moisture
Incompatibility: Strong oxidizing agent
Hazardous decomposition products: When involved in a fire ,burning organic pigments may evolve noxious fumes which may include carbon monoxide ,nitrous oxides, or other toxic compounds, depending on the pigment type
Hazardous Polymerization: Will not occur
Conditions to avoid: None known
11. Toxicological Information
Acute Toxicity: Acute oral LD50 value of 10000 mg/kg or greater in rats
Sensitizing: No data available
12. Ecological Information
Elimination information: The products is not very soluble in water and can thus be virtually removed from water mechanically in suitable effluent treatment plants.
13. Disposal Consideration
Product: Must be made in accordance with Federal State and local regulations.
Contaminated packaging: Uncontaminated packs can be re-used. Packs that cannot be cleaned should be disposed of in the same manner as the contents.
14. Transport Information
Not classified as hazardous under transport regulations.
15. Regulatory Information
Labeling according to EEC directives
Not subject to labelling
National legislation/ regulations
Water hazard class: generally non water hazardous
16. Other Information
N/A = not application
N.D.A.= no data available
The information contained herein is based on the present state of our knowledge and does not therefore guarantee certain properties.
Recipients of our product must take responsibility for observing existing laws and regulations.
The information submitted in this publication is based on our current knowledge and experience.
In view of the many factors that may affect processing and application. This data should not be viewed as a sure guarantee, either for profession description or for detailed application. For any products supplied by Honor Chemicals China, customers also should have the evaluation to check quality and application. Meanwhile, we are sure to supply customers best quality as much as we can.